高电阻值小功率检测仪（耐弧光检测仪）-（统计机管控）

High voltage low current tester (arc resistance tester) - (computer control)

服务英文名称：耐电弧试验机

Product name: electric arc resistance tester

物料应用：NDH-A

Product model: NDH - A

够满足标准的：GB/T 1411-2002《液态绝缘带原料耐高压得很低的功率焊弧蓄电池放电的冲击试验》（相等IEC  61621-1997）及ASTM D495等标准规范的需要构思营造的，并完全符合IEC 149、UL 746A等校正方案

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

核心适合空间及的功能：

本做实验的时候机是决定app于减速机、电子产品产品和挂式电子产品产品等制造业的电工维修用塑、硅胶粘合剂胶和隔绝漆等隔绝原食材的耐脉冲焊接耐磨性综合评价，主采用膏状隔绝原食材如：塑、透气膜、硅胶粘合剂、白云母、陶瓷厂家、玻离、隔绝油、隔绝漆、纸箱等材质的耐脉冲焊接耐磨性检测；

本试验装置机由核算机操控运转，可能提示某一工作报告动态及工作报告的时间，工作报告结尾后并存放某一工作报告数据源，并可word打印.的标准实验操作汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为两排整体设备构造，下面为运行软件，顶部为实验箱。

2 本品牌采取*新智能化操控技术性，能够 决定方式（IEC或ASTM）可自功参与试验检测，并在PC上表示冲击试验时候和最后。

3 **安全性能健康，抗影响实力强，检查准确程度高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断期限出现偏差的原因：不大于 ±10ms

2 调压器电容量：2kVA

3 稳定校正端电压：12.5kV

4 试验台电压降可靠性强，精密度：±3%

5 电压操控高精准度：±10%  瞬时电流測量精准度：1.5%

6 金属电极对试件材料经济压力：（0.5±0.05）N

7 工业食材：钨棒

8 电级长距离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用环镜工作温度：（23±2）℃

10 操作生活环境空气湿度：（50±5）%

11 电源开关：220V±5%  50Hz  10A

12 应力测试    技巧：   新国标/美标/10 mA 连继/20 mA 连着/30 mA累计/40 mA重复

13 疲劳试验方式相应：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物料型号规格：

NDH-A    耐弧光试验报告仪-微机把握

NDH-B    耐焊弧可靠性试验仪-触感屏调控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！